[amayausers.com] Re: design registration issues

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Thu, 13 Aug 2009 05:15:34 UT

This message was posted by flebow on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/8/99.html#000002

Definitely use a cutaway
Cutaways have longer fibers enabling the threads to bevcme more easily 
entangled w the long polyester (for softnesss)fibers of the cutaway much more 
easily than w the short celulosic fibers of a tearaway leading to better 
definition or tighter registration
The no show duiagonal mesh mesh is probably the best answer
The mesh is also made in a low melt fusible version to avoid any slippage in 
the hoop
If you would like samples
Pls just e-mail me off list direct

Fred

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: