[amayausers.com] Re: changing densities
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 6 Feb 2011 16:11:56 UT
This message was posted by Greenwing on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1425.html#000001
Juli
if you select your design in In DS project list right click and select
properties
In the properties dialog click the all elements tab at the top, From there you
can choose the type of element you want to change and all changes will be
applied universal to the whole design.
As far as entry & exit select the element, select and move the O (entry) and X
(exit).
to where you like.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
