[amayausers.com] Re: can not get the Actifeed "hubs" to seat
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 26 Nov 2008 05:36:01 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/563.html#000001
Gabi,
We will have to assume that the rollers and face covers were installed and
seated correctly.
Go into "Maintenance", "Steppers" and in the "Thread Feed" column, left click
on the "Home" tab a couple of times. What you are hearing is the nylon main
thread feed drive gear not meshing properly with the individual thread feed
roller gears. The clicking/snapping will result in the main and/or individual
thread feed gears to fatique and fracture around their hubs if allowed to
continue. Getting all of the gears back in sync will solve your problem.
Sometimes if the thread feed rollers are not seated so that they mesh together
properly, then they will not line up with the main drive gear on the
motor.......
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
