[amayausers] Re: bobin breaks
- From: "PHYLLIS MCINTIRE" <PMCINTIRE@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Tue, 25 Jan 2005 09:13:01 -0800
I don't know if it has anything to do with the bobbin per say; however when
we get false thread break we have to adjust the sensor. We are new at this
so not sure this is correct for your problem.
Phyllis
Crickets' Creations
Crescent City, CA
----- Original Message -----
From: "Cindy D" <cindy_daeltex@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, January 25, 2005 7:55 AM
Subject: [amayausers] Re: bobin breaks
>
> I forgot to mention it : it concerns FALSE bobinbreaks.
>
>>
>>Hi,
>>
>>We get a lot of bobinbreaks on our amaya. We already got the suggestions
>>that our material thickness-settings may be to high or that the bobbincase
>>has to be cleaned or that the thread feed rollers are worn out.
>>We tested using different material thickness, we cleaned the bobbincase
>>and
>>the bobbin and we used several different needles of frequently used and
>>less
>>frequently used needles.
>>But we still have a lot of bobinbreaks.
>>
>>Does anyone has another suggestion ?
>>
>>_________________________________________________________________
>>Geef het leven van zieke en gehospitaliseerde kinderen terug kleur!
>>http://www.msn.be/simonodil
>>
>>
>
> _________________________________________________________________
> Geef het leven van zieke en gehospitaliseerde kinderen terug kleur!
> http://www.msn.be/simonodil
>
>
>
Other related posts:
