[amayausers] Re: blending question
- From: "Susan Davidson" <Sewfly@xxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 8 Mar 2007 18:05:15 -0600
Was trying to avoid having to manually put down the underlay. I am =
crashing
the program looking to do the "liquid fill". In the installed manual =
(help)
do a search on Liquid Fill and it will locate the fills section. =
Scrolling
down, there is Liquid Fill. Tells you to "select" this and by not doing =
so,
my system crashes. Haven't located where to select it --- I am sure it =
is
there, and I am just not seeing it (in the program as well as in the
instructions) --- looking at it too long. =20
Susan
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Roland R. Irish =
III
Sent: Thursday, March 08, 2007 5:37 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: blending question
Just create your own 'underlay' as a separate item and have your =20
'end' stitch
match the 'start' stitch of the color that needs it. That's how =20
Dakota stuff is done-
all fills are actually a separate 'piece' with very loose (high) fill =20
density.
Make sure it is at an angle from the fill above it.
I've played with the blending but haven't done much other than flames =20
for a couple jobs
so its possible there is an automatic way to do it...but if you can't =20
keep the program running...
just cheat and make it yourself. Won't take but a few seconds. Either =20
manually 'copy' the outline
and make the loose fill, or duplicate the item and delete the points =20
for the area you don't want fill in.
Roland
Sunrise Graphics
116 Main St
Claremont, NH 03743
603-543-1324
Preferred method of files is PDF
to our email-we are all MAC based graphic programs here
signman@xxxxxxxxxxxxxxxxxxx
On Mar 8, 2007, at 6:28 PM, Susan Davidson wrote:
> Does anyone use the auto-blending in DS pro+? If so, is there
> anyway to put
> a underlay stitch in the 1st color and not the 2nd?
>
> TIA,
>
> Susan
>
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=20
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=20
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
