[amayausers.com] Re: adjusting the pressure foot for hats
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 11 Sep 2007 11:04:57 UT
This message was posted by Pure Embroidery on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/184.html#000004
In the settings tab there is a option under thread feed to set the lower limit
of the auto actifeed. It keeps the machine from going to a setting of 1 or two
then jumping to 10 and back again. This could create loops in the design.
By changing lower limit, you can prevent such a drastic change in thread feed
and thread tension.
I do the same for polo shirts. I set the lower limit to 3. I let it go down to
1 on wovens if it wants to. Towels and fleece I set at 6.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
