[amayausers.com] Re: XT Sewing poorly
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 2 Apr 2010 23:18:50 UT
This message was posted by gcannon on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/913.html#000007
I would try (no-I definitely would) use standard thread feed when using cotton
thread, which is very fragile especially when an Amaya gets ahold of it. I
would start from the default settings that are in OS to refer to, and go from
there. Under new situations I always run lots of samples>make adjustments>more
samples>got it right>"commit to the cloth" & run a garment. I know samples cut
into the maintenance timers "time", but to get the stuff right, I don't mind.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
