[amayausers.com] Re: WireFrame Editing
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 4 Sep 2007 14:11:10 UT
This message was posted by Pure Embroidery on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/227.html#000001
When you open your design, you will see all of the elememts on the right hand
side. Right click on any element and you will get a pop up window. One of the
options is to convert to wireframe.
Before you do this, I would copy the orignal element and put in a color change
so that if you really mess up, you can just delete all of the wireframe
elements and go back to the condensed element. Make sense???
When you convert an element to wireframe, you could get between 2 and 200
wireframe elemements that consist of lines, fills, columns, .... and who knows
else. Be prepared.
I normally test sew a design as is. Then I see what I want to change and go
into the wireframe editing mode and adjust/add/change/remove what I want and
test sew again.
Hope that answers your question.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
