Well, it's not trimming. I set the trim count to 2, using the same file (.exp to .ofm) which had 2 jumps. No results. I'll try .dst and let you know. Although, now I think there is something else I am overlooking. Mary Mary Buckle Shuffletown Embroidery Charlotte, NC 704-398-1273 -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Shuffletown Embroidery Sent: Monday, March 20, 2006 8:10 AM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Trims Hi Anand, Welcome to the world of Amayas! What I found was that the .dst format read into Design Shop with 3 jumps, while the .exp format read with only 2. Interesting, don't you think? Since I had my jump count set to 3 for trims, the Amaya wasn't trimming. This is all theory so far since I haven't been in the shop to try it yet, but I think it's probably the case. Maybe one of the computer pros can explain these differences. Mary Buckle Shuffletown Embroidery Charlotte, NC 704-398-1273 -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Kesavan Sent: Sunday, March 19, 2006 10:34 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Trims Mary, Pleae let me know if it works. I have just ordered my first Amaya. Anand I am suspicious that the format changes might be causing the problem. I never would have thought of trying .dst. I'll check it out. Thanks Anand. Mary Mary Buckle Shuffletown Embroidery Charlotte, NC 704-398-1273