[amayausers.com] Re: Thumb Screws on cantilever bar for WACF
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 30 Apr 2010 13:43:53 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/936.html#000013
Wayne,
I would venture to say that 90+ percent of the problems that folks experience
with the Amayas' can be placed into two catagories. 1. Lack of Training. 2.
Failure to or refusal to properly lubricate the machine on a regular basis.
The "Timers" help to remind you to lubricate certain areas of the machine, but
should not be relied on as the gospel. As one example, machine is used, say 100
garments, machine sits for a week, machine is used for 50 garments then sits
idle for 3 or 4 days, etc. The oil/grease can/will dry out during those idle
periods. There are "LOTS" of varibles at play here. If you are waiting for the
timers to tell you "everytime" to lubricate the machine, then you are waiting
too long...simple as that.....
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
