[amayausers.com] Re: Thread triming

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Mon, 12 Oct 2009 00:53:32 UT

This message was posted by Owl embroidery on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/799.html#000002

Thank you for your helpful hint.  I have watched the machine for awhile, and it 
seems to doing it in random.  I started to writing down which needle is doing 
it, and gave up after awhile.  My machine is Amaya XT, purchased new machine 
about 5 month ago.  I replaced all needles(75/11), and made sure it is turn 
about 5 degree to right.  Check to see if trimmer is working correctly, and it 
seems to be. Where should I look for cutting length, and how should I change it?


The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list


Other related posts: