Jim, Have you documented this problem with Melco? It may be that the pinch le= verarm is defective and the thread feed roller assembly needs repaired or = replaced............ Rod Springer Melco Tech On Mon Dec 4 14:53 , webmaster@xxxxxxxxxxxxxx sent: This message was post= ed by J&O Enterprises on AmayaUsers.com. PLEASE DO NOTREPLY VIA EMAIL.= Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php\?/topic/2/52.htm= l#000010[1] Hi Just an update. I installed a new red-roller, new cover, and new yellow rol= ler. This had no change on the sew (having very loose threads). Thus, I'm b= ack to my original idea being that this particular "arm" is not exerting en= ough force on between the red-roller and yellow-roller. If I hold my finger= lightly on the arm, the sew is perfect. Thanks, Jim =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D The AmayaUsers Mailing List Website: http://www.amayausers.com[2] Discussion Board: http://www.a= mayausers.com/boards[3] Subscribe/Unsubscribe: http://ww= w.amayausers.com/list[4] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D ---------------------------------------------------------------------------- Msg sent via CableONE.net MyMail - http://www.cableone= .net= --- Links --- 1 3D= 2 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amayausers.com" 3 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amayauser= 4 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amay= =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================