This message was posted by monogramsbylaura on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1273.html When sewing on flats today, I had a thread break that failed to be detEcted and resulted in thread being wound around rolled. This was cleaned out and xt failed to sew. Just thread breaks. It didn't matter what needle or what design, just thread breaks after about 20 stitches. The stitches that did sew didn't look right but the bobbin was picking up. Amaya xt bought new 2007 Design shop pro + I checked the hook and it appeared the hook point was rotated to the right and not adjusted properly. This was adjusted and the hook timing was adjusted as outlined in the tech manual. Needle guard gap adjusted Hook retaining finger adjusted with provided tool Bobbins checked out ok What am I missing. Only machine I have and need suggestions. Thanks =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================