[amayausers] TECHNICIAN QUESTION
- From: e3m@xxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 23 Jul 2007 15:18:25 +0000
Mr. Rusty Silver,
I'm new to the list and was wondering if you could help me with your technical
know how and experience.
What would be the correct applied torque ratings for the newer style caster
locking levers on the Amaya XT chassis support system? And do I need a special
device to obtain these values such as a inch pound torque screwdriver, say
between 0-30 pounds? I've tried looking this up in the owner's manual but have
been unsuccessful so far.
I would like to thank you in advance for all your help.
Shirley Joomusveekitting
"Stitching for Scratch"
Dogpatch, USA
-------------- Original message from "Russell Silva"
<russell@xxxxxxxxxxxxxxxx>: --------------
> Hi Kathy,
>
> If you trade in one of your older machines, you might be able to get a
> package deal and get both. Without knowing what you have to spend and what
> your specific needs are that is a tough question for someone else to answer.
> If you do all of you own digitizing and need more features, then maybe you
> would be better off with the software, if you need more production because
> you can't keep up with your orders then maybe you should get the machine.
> For myself, I send out my digitizing so I would get the machine. Did you go
> to the ISS show in Providence? I will be at the Melco booth today and
> tomorrow.
>
> Russell Silva
> R.S. Embroidery
> Certified Amaya Technician and Trainer
> New England Area
> 508-222-4433
>
> ----- Original Message -----
> From: "Kathy Georgianna"
> To:
> Sent: Friday, July 20, 2007 7:54 AM
> Subject: [amayausers] Re: question
>
>
> > If you had a certain amount of money and you had a choice of new software
> > that added to your digitizing or new machine which would you do.
> > I have older melcos ,work well, and older digitizing program viking pro
> > works well.
> >
> > I went to ISS show and saw mega stuff.
> >
> > If everything works well which would you get to make it better.
> >
> > the digitizing software DS or the machine Amaya XT
> >
> > I did see a number of the middle size machines they weighed from 45 # to
> > 81#
> > , 4-6 threads ,hat and no hat ,$3500 to $6000 .
> > Would be good for sample stitch out , portable ,whatever.
> >
> >
> > ===========================================================
> >
> > The AmayaUsers Mailing List
> > Website: http://www.amayausers.com
> > Discussion Board: http://www.amayausers.com/boards
> > Subscribe/Unsubscribe: http://www.amayausers.com/list
> >
> > ===========================================================
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
- » [amayausers] TECHNICIAN QUESTION
