John, If you are going to use the CCF older style cap frames, YES, definitely take the wings off of the cap driver. The older style frames have a more limited left to right movement and the wings will impact the sides of the cap frame, which is not a good thing. Rod Springer Embroidery Cottage Rod & Sharon Springer Melco Amaya Tech & Trainer Design Shop Pro+ Digitizing Boise, ID 83713 208-938-3038 ----- Original Message ----- From: "John Yaglenski" <john@xxxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Sunday, March 12, 2006 4:19 PM Subject: [amayausers] Sewing Caps > Ok, so we finally got the normal cap frame (green) and framing stand with > the pull down bar to hoop tight instead of the WACF and I have a > question... was it someone here that said they removed the wings from the > cap driver? How about running with the normal needle plate rather than > the raised. > > What produces best results. Any other tips to share? Messing around with > it tonite to see if I can produce any better results than on the WACF > which I have had limited success with in the past. > > - - - - - - - - > John Yaglenski > President / Chief Executive Officer > Levelbest Communications > > I: www.levelbest.com > P: 301.591.2481 / 888.229.1779 > F: 501-631-4544 > > > > > > > ________________________________________________________________ > Sent via the WebMail system at mail.levelbest.com > > > > >