This message was posted by djames on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/3/187.html#000001 Di, To delete the stitches under the car. 1st thing I would do is turn off all the colors on the car except the outline, if there is one, so you can see the stitches you want to delete. You need to set straight marks iside of the car outline at that point (click on it) you need to split the element (looks like a bowtie) Do this at the beginning of the stitches under the car and at the the point just before it goes out from under the car. This may have to be done several times. In the project tree you would then delete that or those objects out of the design. You would either put in a lock on both ends and a trim or put a walk stitch between the sections. As for changing the density of the car. What you did will change all fills and all columns the same. You can also click on specific elements, right click and change the specific properties for that element, such as stitch length, fill density, column density etc. As for sewing outside the sew field. If you are just slightly outside the field, you can go to settings and turn off the Hoop Limits. Hope this helps, Debbie =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================