[amayausers.com] Re: Satin Stitch, problem
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 20 May 2008 23:57:11 UT
This message was posted by bigcat on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/563.html
Hello,I'm stitching out a design on some vinyl material kinda like leather just
softer pretty thick. Well my design stitches very nice when satin stitch is
going down/right, but when it starts to stich on its way up/left. It loops real
bad missing stitches like if there were no bobbin inserted. But as soon as
design is stitching downward it does very good. The width of my column is about
3/16" at it's thickest point. any ideas. Thanks!
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
- » [amayausers.com] Re: Satin Stitch, problem
