[amayausers.com] Re: Rotary hook stuck at half turn
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 11 Jul 2008 06:26:31 UT
This message was posted by Juli in Kona on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/447.html#000003
Loosen the two screws on the left side of the "Finger". The end of it fits
into the little groove in the black part of the bobbin thingy. Then spin the
black part until the notch is at the top and let the finger go right into the
notch. Now, there is a gauge that came orginally with all our machines that
looks like a little flag. the "pole" of the flag fits into the space behind
the finger in the notch. Hold the finger against it gently and tighten the two
screws again. It will now work.
If it doesn't, write again.
Juli in Kona
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
