[amayausers.com] Re: Returning to Origin
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 21 Jul 2008 20:54:01 UT
This message was posted by Juli in Kona on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/620.html
I am at the end of a design and putting in the name (part of original design)
when I realized it is the wrong name. So, I took out the stitches, went back
to the original design and changed the name. Now, my problem is that I moved
the hoop off the default center to accommodate my slightly off hooping. I am
still on my original wrong design with the new design waiting in the wings.
What is the procedure to start the new longer name in the correct place? What
I think I have to do is "return to origin" now in the old design, so I will be
exactly where I started. At this point load the new design and then I need to
"move" to the last color which is the name. This should put the needle in the
right place. Is this procedure correct? Will this really get me to the
correct position?
When I load the new design, I have to first "reset" the old design.
Immediately before I load the new design, the hoop must be centered exactly
like it was for the first attempt and remember, that was off center but I just
don't know the numbers.
Juli in Kona
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
