[amayausers.com] Re: [Re: Quotes
- From: "John Yaglenski" <john@xxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 10 Feb 2011 19:15:00 -0500
the user will not see your reply unless it's on the boards.
- - - -
John Yaglenski
President / Chief Executive Officer
Levelbest Communications
Community Websites - Graphic Design - Web Development
I: www.levelbest.com / P: 240.367.9911
Levelbest Network Sites Include:
INTERCOT | WebDisney | AmayaUsers | INTERCOTdcl
Levelbest Embroidery | UrbanaMaryland | Mousehut
This e-mail message and any attachments are confidential and
may be privileged. If you are not the intended recipient, please notify
Levelbest immediately -- by replying to this message or by sending an
e-mail to john@xxxxxxxxxxxxx -- and destroy all copiesof this message and
any attachments. Thank you.
----------------------------------------
From: "Wayne at palmdale trophy" <pte@xxxxxx>
Sent: Thursday, February 10, 2011 7:14 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers.com] Re: [Re: Quotes
79F8FDE2-E90C-4120-9A2C-E484CCFAA091 repeat #ffffff
X-ASN,X-ASH,X-AN,X-AP,X-AD ;
I would call the person who designed the program
Jim Serritella 301-253-3971
Laytonsville, MD
-------Original Message-------
From: theboards@xxxxxxxxxxxxxx Date:
2/10/2011 3:52:04 PM To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers.com] Re: Quotes
This message was posted by hemb on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/3/620.html
As I had a lot of money in the past I purchased a
program calle EZestimator. However I never to around to using it. Now that
I am I wish I had used it from the time I purchased it. My question is in
the set up when I tell it my cost for thermoflex, for heat press, it tells
me my cost is .027 cents per liner inch. It is 15 in wide so does that mean
that If I do a line of letters 1 in tall by 15 in wide did I only spend
.027 cents for that design? If not how do I figure the cost of heat press
material. Thanks for any help.
===========================================================
The AmayaUsers Mailing List Website:
http://www.amayausers.com Discussion Board:
http://www.amayausers.com/boards Subscribe/Unsubscribe:
http://www.amayausers.com/list
===========================================================
Other related posts:
