This message was posted by RANDIM on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/561.html#000004 I have purchased blank patches with the merrow edge and then sew directly on the patch. I get blank ones from patchsupply.com. There is a min quantity of 50. I set my design up to do a walk normal stitch the size of the patch and then insert the applique command. It does the stitch (these were round patches), the machine then pushes the frame out and I place the blank patch with a little spray adhesive or double stick tape and place the patch in the stitched outline. Press start and then stitch out the design. I use the smallest frame I can with a couple layers of tear away backing. I use my 5.5" slim line frame for 3 to 3.5 inch round patches. it is time consuming but it works. Regards, Randi One Stitch @ A Time Embroidery =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================