Cut Away Stabilizer. Very tight hooping. 8" X 3.5" Stock design that I enlarged.(Probably too much.) No pull comp on my end. I'm not a digitizer and know very little about the process. Lisa & Don Ridley Wolf Embroidery Wolfemb@xxxxxxxx ----- Original Message ----- From: "Sharon" <springer37@xxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Thursday, December 30, 2004 11:47 AM Subject: [amayausers] Re: Nylon and Pulling > Hi Lisa, > What stabilizer are you using? How tight are you hooping? How large is the > design? Is the design digitized by someone or a commercial design? Have > you put any pull comp in? > Sharon > > Rod Springer > Melco Trained Technician/Owner > (Design Shop Pro+ Digitizing) > Boise, ID > (208) 938-3038 > springer37@xxxxxxxxxxxx > ----- Original Message ----- > From: "Wolf Embroidery" <Wolfemb@xxxxxxxx> > To: <amayausers@xxxxxxxxxxxxx> > Sent: Thursday, December 30, 2004 9:21 AM > Subject: [amayausers] Re: Nylon and Pulling > > > > I'm stitching out Cheerleader jackets made of Polyester shell and a thin > > cotton liner. The design stitched perfectly on backing but when I > stitched > > on the jacket it pulled. Put a pucker in the jacket and did not outline > > properly. Material thickness is set at 4 > > > > Any Suggestions? > > > > Lisa & Don Ridley > > Wolf Embroidery > > Wolfemb@xxxxxxxx > > > > > > >