Hello, Rod or Sharon has just posted in the Machines & Hardware forum of AmayaUsers Discussion Boards under the title of blinking green light on start up on my XTS. This thread is located at http://www.amayausers.com/discussion/showthread.php?5983-blinking-green-light-on-start-up-on-my-XTS Here is the message that has just been posted: *************** Are you using the s computer(s) you used in Hawaii? Cross over cable is to be "only" used between 1 machine and 1 computer with no routers, hubs, or switches present. Have you checked to see if you adapters are still listed in Tools, Options, Ethernet ? If not then you will need to re-install them again. If they are still showing, is one of them hi-lited? If not hi-lited, select one , turn the machine off, close AOS and start over by opening AOS, get the grey screen ,but before turning on the machine, go into Tools, Options, Ethernet and check the Force Download checkbox. Now turn on the machine. If this did not work, try one of the other adapters and do the same thing... I may be wrong, but I have a feeling that it has something to do with the new internet connection. Rod Springer Amaya Tech & Trrainer *************** =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================