Hello, Rod or Sharon has just posted in the Machines & Hardware forum of AmayaUsers Discussion Boards under the title of Disable Beep. This thread is located at http://www.amayausers.com/discussion/showthread.php?5979-Disable-Beep Here is the message that has just been posted: *************** Nope, no secret way to get rid of the message. If the machine is allowed to stop on its own, rather than, as you indicated....( I catch most of my thread breaks before the machine does )... the message will not appear. In the case of a "false" thread or bobbin break, the thread will still be attached or if you were to push the "little red' stop button, the thread will still be attached to the garment. To use the jog button or any other function to move the needlecase or the hoop position before the thread is trimmed, would mean that the attached thread would be drug over the garment, bending the needle until either the thread breaks or the needle breaks or the still attached thread gets sewn over making a big mess of things. As Sharon indicated, the machine will automatically move back 10 stitches when an actual break occurs. In the newer software, you can now set the number of stitches you wish the machine to return to. There is a setting for either the top stitch break or in the case of a bobbin break a separate setting for that too.... It is just one more of those things that tend to annoy us in this wonderful world of embroidery...remember the adhesive spray and WD40 wash...bet you do...? *************** =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================