[amayausers.com] New Post/Thread Notification: Machines & Hardware

  • From: "AmayaUsers Discussion Boards" <theboards@xxxxxxxxxxxxxx>
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Mon, 31 Jul 2017 19:26:04 +0000


Hello,

Juli in Kona has just posted in the Machines & Hardware forum of AmayaUsers 
Discussion Boards under the title of XT down.

This thread is located at 
http://www.amayausers.com/discussion/showthread.php/6668-XT-down

Here is the message that has just been posted:
***************
When I turn on the XT after opening the OS, the laser light on the machine 
turns on and when I look at the motherboard, some but not all its light are on. 
 But the 2 files do not upload to the machine and nothing I do either on the 
computer or on the machine does anything at all with one exception.  And that 
is when I push in the big red stop, a light on the motherboard will go out and 
when I pull the stop out, the light comes back on.  So, in my thinking, it 
either the computer, the cable or the machine itself.  My husband tested the 
cable and all test ok.  So we are down to either the computer or the machine.  
It has been so long since I set this machine up that I can remember if there is 
some settings in the network that has to be made.  Recently my internet service 
got disrupted and I had to unplug and then plug in the electricity so it would 
initialize.  This has happened before and there was no problems with my 
machine.  The modem/router is upstairs connected to my main office 
 computer.  And the computer that runs my XT is downstairs connected by 
wireless network to the upstairs router.  

Several weeks ago, I had a bad accident with the XT. When I turned it on, it 
crashed into the hoop and although the needle did not hit the hoop, the presser 
foot did.  Rod helped me though that and it ran fine afterwards.  But now it is 
dead in the water.  And that condition came on slowly.  Sometime it would start 
up with no problem, and sometimes I would have to try every half hour until it 
finally would come on.  

So, any ideas?  I did take out all the wires on the motherboard and re plug 
them in.  That didn't help.
***************

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: