Hello,
TakeAim has just posted in the Machines & Hardware forum of AmayaUsers
Discussion Boards under the title of Top thread tension issues.
This thread is located at
http://www.amayausers.com/discussion/showthread.php/6656-Top-thread-tension-issues
Here is the message that has just been posted:
***************
I am having the most irritating problem lately. Within the last 4 months, my
Amaya XT absolutely will not stitch with Rayon thread. Polyester has no issues
whatsoever. The machine will stitch between 6 and 30 stitches and the Rayon
thread simply snaps.
Listed below are the steps we have taken to try and resolve this:
* Replaced/Readjusted Bobbin
* Replaced Thread Spools
* Replaced Needles
* Replaced rubber thread feed wheels
* Replaced red thread feed wheels
* Reset timing (twice) - not because timing was wrong, just to remove it from
the equation
* Reset thread feed gear spacing
* Adjusted thread feed settings to try to optimize performance
* Replaced thread break detection assembly and circuit board
I am nearly at the hair pulling stage. And am open to whatever suggestions the
community can throw at me.
I really appreciate your help!
Matt
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================