Hello,
Rod or Sharon has just posted in the Machines & Hardware forum of AmayaUsers
Discussion Boards under the title of Bobbin and trimming issues.
This thread is located at
http://www.amayausers.com/discussion/showthread.php?6499-Bobbin-and-trimming-issues
Here is the message that has just been posted:
***************
Assuming that "all" other machine settings are correct and that the hook timing
has been set correctly "and" is still in spec, then "if" it is just a trimmer
issue:
1. the selector/knife throw is out of adjustment
2. the selector is out of position and is not picking up the top/bobbin thread
correctly
3. the pushrod wires are bent again
4. threadfeed gears are worn and is letting the thread slip and not feeding the
thread properly creating loose conditions.
5. the underthread pressure spring is not retaining the thread properly.after
the knife/selector retracts
This is just some of the issues that may be present relating to the trimming
issue
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================