[amayausers] Needle Break/Thread trims

  • From: "Craig Salmond" <salmond@xxxxxxxxx>
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Sun, 12 Mar 2006 12:42:08 -0500

I had a bobbin run out of material in the middle of a hat.
I replaced the bobbin, and apparently didn't have it snapped into place.
The needle #13, came down, snapping itself in two, and crushing the bobbin.

No worries I figured. I replaced the needle, checked the bobbin case,
and replaced the bobbin, this time I made sure it snapped into place.

Now needle #13 constantly has thread breaks, and won't thread trim for
beans. The other needles sew great, and trim as well.

Any ideas? (Besides in the future making sure my bobbin is in place) :)

Craig
Hurricane Embroidery

Other related posts: