This message was posted by Cindy on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/470.html I was going down the line doing all of the maintenance steps. Everything was going great until I got to the last or second to last step. I'm not sure which one I was on--the 20,000,000 or 100,000,000. The 20,000,000 had reset the remaining stitches back to 20,000,000, so I think I finished that one. Anyway, I had removed the right upper arm front cover, lifted the pressure foot while greasing the black plastic piece behind the white piece. (I believe the cam follower.) It flashed a BIG sign to make sure I had the cover replaced or it could cause damage and a service would be required. I had the cover replaced, but as soon as I clicked okay, it will not continue. It keeps telling me the head is not up and it made a noise (not terrible) and tells me "there has been an error moving machine. maintenance will not continue." and "y timeout error. took too long to do y move." Of course, I have an order due Monday. Is this going to require a service or can someone out there help me? Thanks so much! =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================