[amayausers] Re: Mock Collar
- From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 20 Jul 2005 12:11:48 -0400
I looked in my Melco catalog-all I find is the solvy for 'top' sewing...do
you have the stock # for the backing?
Roland
> From: Mike Garber <agraphic2@xxxxxxxxxxxx>
> Reply-To: amayausers@xxxxxxxxxxxxx
> Date: Wed, 20 Jul 2005 08:57:58 -0700
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: Mock Collar
>
> Herb,
>
> When the backing is gone what happens to the thread. Does it get loose
> and loopy?
>
> Mike
>
> HK Acree wrote:
>
>> MELCO has a water soluble backing. I have used it in heavy terrycloth
>> with excellent results.
>>
>> Herb
>> ----- Original Message ----- From: "Roland R. Irish III"
>> <signman@xxxxxxxxxxxxxxxxxxx>
>> To: <amayausers@xxxxxxxxxxxxx>
>> Sent: Tuesday, July 19, 2005 10:57 AM
>> Subject: [amayausers] Re: Mock Collar
>>
>>
>> my 2¢= heavy cut away, you're correct-tear away is rough and a mock
>> turtle
>> is going to be snug on the neck. I do the same for polo shirts even
>> though I
>> hate to see that 'patch' showing through the shirt if its worn snug.
>> I've heard of a water soluable backing somewhere but don't know much
>> about
>> it-that would be great! Its not solvy, but a heavier backing, maybe some
>> sort of loose 'felt' type stuff-so eventually all excess would be
>> washed off
>> the back and leave just the embroidery and the felt sewn into that.
>>
>>
>>> From: Mike Garber <agraphic2@xxxxxxxxxxxx>
>>> Reply-To: amayausers@xxxxxxxxxxxxx
>>> Date: Tue, 19 Jul 2005 10:40:04 -0700
>>> To: amayausers list <amayausers@xxxxxxxxxxxxx>
>>> Subject: [amayausers] Mock Collar
>>>
>>> Hey,
>>>
>>> I am sewing block letters on a mock turtle neck collar. What backing
>>> would you use?
>>> I was going to use tear away. Tear away might be too rough.....
>>>
>>> Mike
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>
>
>
>
Other related posts:
