[amayausers.com] Re: Missed trims and new needles...a correlation?
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 29 Nov 2007 16:20:05 UT
This message was posted by Judy on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/264.html#000006
Ah, Roland, you know the trick! I'm on the coast so I don't usually have to
deal with it. But it's been freezing here lately, and freeze equals lower
humidity equals static -- especially now that I switched from rayon to poly
thread...
Maybe Melco could think about making the red pinch rollers and the yellow feed
rollers out of anti-static materials?
When I start to see the static affecting Hal, I take an UNSCENTED (so no April
Freshness, but that would be cool) dryer sheet and rub it all over the face of
my project before I restart the machine. Then I start Hal up and hold the
dryer sheet on the red pinch roller that is feeding for a count of about five.
Seems to work..!!
Maybe Melco could think about making the red pinch rollers and the yellow feed
rollers out of anti-static materials?
Judy
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
