[amayausers.com] Re: Metalic Threads
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 14 Jun 2009 21:55:36 UT
This message was posted by Steve on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/145.html#000006
I run IsaMet Metallic thread fill stitch at 3.3 density. I run satin stitch
Metallic thread at 4.4 density. As Chrissy said, slow the machine down. I run
it at 700spm and it runs fine.
Your mileage may vary!
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
