[amayausers.com] Re: Looping (thread break)

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Thu, 24 Jun 2010 03:21:18 UT

This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY 
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 


If this is only happening on the # 13 needle, it is not your timing....check 
the needle orientation carefully...make sure that it is either straight ahead 
or turned 5 to 10 degrees to the "right"....also, take off the red pinch roller 
and remove the inner threadfeed roller, wash them in med hot soapy water, 
relubricate and reinstall them. Becareful not to get any grease on the face of 
either roller or the thread will track off to the left side of the rollers and 
create a messy birdnest....

Rod Springer
Amaya Tech & Trainer


The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list


Other related posts: