[amayausers.com] Re: Logo on dry-wick performance knit
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 5 Mar 2009 01:42:09 UT
This message was posted by Wishes on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/332.html#000003
We have been using the following on dry mesh and are having good results.
light colored shirts
Nylon mesh-if from Melco it has a stretch to it so use two layers of nylon mesh
layed opposite of each other, meaning turn on so it has more stability. Use a
piece of tear away under the mesh.
If you have diagonal mesh (newer version of nylon mesh) us one layer with the
tear away.
dark shirts-
having looked at garments in retail stores, they have two layers of cutaway
under their logos.
All of these have been stitched with the solvy on top.
Good luck.
Margaret
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts: