thanks for all the info! Kushnerick <bkushner@xxxxxxxxxxxxxxx> wrote: Don't know the leather you will be stitching on or the software you are using but when stitching on leather, the goal will be to punch as few holes as possible and make these holes as small and far apart as you can. The type and quality of leather will often dictate what you can and can not get away with. I would suggest that you : - lower your stitch density [start with at least a 20% reduction in what you would normally use and reduce that density even more if you can] - use little or no underlay stitching - widen the column width of your lettering to at least 4mm but 5 or 6 mm would be even better [what will work best often depends on the leather itself] - use a 70/10 sharp point needle. If you don't have 70/10's then use 75/11's - use a tear-away stabilizer [although most good leather really needs no backing at all, many feel more comfortable using some form of stabilizer] - try to avoid using regular hoops because they can leave hoop marks. Something like FastFrames or a clamping system are often a better choice. If you do use regular hoops ..... do not overly tighten the hoop and keep the jacket hooped for the shortest time possible [hoop the jacket, immediately stitch the name and then remove the hoop as soon as the stitching is done]. - slow your machine speed down considerably [again, this will depend on the leather and the quality of the lettering but for virtually all leather stitching, machine speeds should be reduced by maybe something like 25 - 30 % or more] - try adding a drop of silicone lubricant to the needle [something like Needle-Eze] when doing leather. Some embroiderers like to do this when stitching on leather to reduce friction but it usually is an unnecessary step - get yourself scrap leather to practice on [should be similar quality / weight] ..... better to find out that you have a problem on scrap pieces than on the jacket. If you don't have access to scrap leather, then use a soft thin vinyl as a substitute. Take your time, practice on scraps and things will turn out fine. Happy Holidays Bob . Darlene Weber wrote: >I have to embroider a word on the leather sleeve of a Letter Jacket. > Does anyone have any advice or procedures they can share with me??? > I really don't want to mess up a $100+ jacket!! > > Thanks, > Darlene > __________________________________________________ >Do You Yahoo!? >Tired of spam? Yahoo! Mail has the best spam protection around >http://mail.yahoo.com > >=========================================================== > >The AmayaUsers Mailing List >Website: http://www.amayausers.com >Discussion Board: http://www.amayausers.com/boards >Subscribe/Unsubscribe: http://www.amayausers.com/list > >=========================================================== > > > =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =========================================================== __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================