This message was posted by Greenwing on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/1161.html#000003 go to thread feed in the settings set the lower thread feed to about 3 or 4 and try that. be sure to hit apply or it will not stick. it allows a bit more thread and less pull on the material. also what is your density the letters are quite small so it should not be to dense a 4.5-5 pt hope this helps. a sharp needle may help an 75/11 good luck =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================