Tom, To change stitch count for entire design, go to the project tree and highlight "design" at the top of the tree. Then click on "edit" and then "Scale Factors". You can enter a % to reduce overall column or fill density. The larger you make the number, the lighter the density. 125% will decrease density therefore decreasing stitch count. 85% will increase densities and stitch count. Remember, "design" must be highlighted to get the effect on the entire design. If only one eliminate is highlighted only that element will be changed. Hope this helps. Frank Force Ten Embroidery ----- Original Message ----- From: "Tom McCloud" <mccloud12@xxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Saturday, January 08, 2005 8:01 PM Subject: [amayausers] Re: Increase stitch count > To All, > With Design Shop, is there a way to increase stitch count > other than > by adjusting density? > Thx, > Tom > > > >