[amayausers.com] Re: Hooping Question
- From: "r.rinehartsr" <drader@xxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 26 Sep 2007 08:49:05 -0500
Oh, you did say it was too big for the tote, so why not split the design into
to sections, if possible?
Debbie Rinehart
Deb'z-N-Stitches
www.debznstitches.com
765-342-7392
----- Original Message -----
From: Studio 187 LLC
To: Amaya Users
Sent: Wednesday, September 26, 2007 7:15 AM
Subject: [amayausers.com] Hooping Question
What does everyone use to hoop or prepare a tote bag for embroidery with a
full side of embroidery? Figure about an 11-inch square? The XT doesn't seem
to have any hoop that fills this need. The tote is too small for the jacket
frame and the design is too large for the 8" hoop. I've been using the Fast
Frame 9x11 but I'm still in need of those extra 2 inches for a square border
around the tote front. The larger clamping system seems to be a good
solution except it may as well be a million dollars because it is not cost
effective for me. I would need two. Any ideas?
GF
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
