[amayausers.com] Re: Hooping Caps
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 9 Oct 2007 01:40:47 UT
This message was posted by Linus on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/229.html
I am seconds away from severe frustration on hooping caps and its
unbelieveable. I am using the XT Extended frame and I even downloaded and
watched Herb's video on hooping caps, but I am still having a probem or two.
1) Are the teeth of the top strap supposed to go in front or behind the teeth
under the cap? 2) Following the teeth theme, where are the teeth for the
sides supposed to be in relation to the underneath teeth? 3) The design is
very simple and I have ensured it stitches center out, bottom top, but when I
was able to stitch out the lettering (Boffo-Dak, .3 in height, 65/9 needle, 3.2
density), the lettering is inconsistent and not smooth (some letters have
thread bunching and others it looks "leaned out"). I adjusted the presser foot
to go all the way down, then up two clicks and slowed the stitch speed to 850.
I think its a hooping issue, but not sure. Can someone help?
Thanks in advance.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
