[amayausers.com] Re: Hook timing to stay at set number
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 10 Jun 2010 18:45:28 UT
This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/958.html#000002
Red,
You might get some degree of variance due to belt tension and or motor play.
However, when it comes to tolerance, you will have a half a degree on either
side of your hook timing position which should be adequate.
If you find that you consistantly get 199.2, overshoot it next time and see if
it settles back to a number closer to your 199.9 number.
Ed
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
