Ok, will do! -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Sharon Sent: Sunday, August 22, 2004 7:44 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Help - I'm stuck Hi John, Rod would be happy to talk with you--he is done with the lawn--if you would like to call. 208-938-3038 (would be nice if Melco had some type of phone allowance for techs). Sharon Rod Springer Melco Trained Technician (We also do Design Shop Pro+ digitizing) Boise, ID (208) 938-3038 springer37@xxxxxxxxxxxx ----- Original Message ----- From: "John Yaglenski" <john@xxxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Sunday, August 22, 2004 4:47 PM Subject: [amayausers] Re: Help - I'm stuck > 301.874.0404 is our number here. I will be glad to call you back so it's on > my dime. > > JOHN > > -----Original Message----- > From: amayausers-bounce@xxxxxxxxxxxxx > [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Sharon > Sent: Sunday, August 22, 2004 6:40 PM > To: amayausers@xxxxxxxxxxxxx > Subject: [amayausers] Re: Help - I'm stuck > > Hold on John--Rod is out mowing the lawn and I will have him respond in just > a little bit---if you have a phone near the machine, maybe you can call Rod > and he can walk you through the things to try... > Rod Springer > Melco Trained Technician > (We also do Design Shop Pro+ digitizing) Boise, ID > (208) 938-3038 > springer37@xxxxxxxxxxxx > ----- Original Message ----- > From: "John Yaglenski" <john@xxxxxxxxxxxxx> > To: <amayausers@xxxxxxxxxxxxx> > Sent: Sunday, August 22, 2004 4:21 PM > Subject: [amayausers] Help - I'm stuck > > > > My arms that hold the hoop are stuck in an off center postion. I tried > > getting the hoop to center and it wont. I also tried shutting down the > > machine and starting up again. No luck. Then I deleted the last job in > the > > queue from the amaya os and still nothing. I am stuck off center. > > > > When I tell it to center from the keypad.... It moves right to the off > > center postion. When I move right, it wont let me center the hoop. It > goes > > only so far and stops. I was getting all set to run some practice sewouts > > and I'm stuck. This issue came up right afte the rotary hook oiling > notice > > came up, I ran it and cleared the notice. > > > > HELP. :) > > > > JOHN > > > > > > > >