[amayausers.com] Re: Hats

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Tue, 14 Jul 2009 18:57:58 UT

This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY 
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/927/2.html#000018

Roland,

Back to Herb and Sharons cap video...Herb explains very well how to use the 
WACF style frames...it is on the Amayausers web page...

With your new XT, you will be using the XT EXTENDED cap driver designation 
while use these frames. If you decide to try the old CCF style frames, the 
CCF/WAD will be used just like on Big Red.

Proper use of the XT Extended frames allows the cap to lay flatter on the 
sewing arm thereby allowing use of the presser foot just as if you were sewing 
flats and at a higher speed but the design must be properly digitized also...

Rod Springer
Amaya Tech & Trainer

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: