[amayausers] Re: Gaps in embroidery
- From: william schroeder <sschroed2@xxxxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 9 Nov 2006 19:50:59 -0800 (PST)
Thank you, it makes perfect sense. However, I did try moving those boxes and
didn't see any changes in the gap.
The graphic is about 6 inches wide, should I move the entry to the opposite
side from the exit point?
Sue
----- Original Message ----
From: Body Cover <info@xxxxxxxxxxxxxxxxxxx>
To: amayausers@xxxxxxxxxxxxx
Sent: Thursday, November 9, 2006 7:39:21 PM
Subject: [amayausers] Re: Gaps in embroidery
Try to change the start and stop points (drag the little in and out arrows to a
different location)
I have a feeling that the underlay isn't tacking down the sweatshirt material
in the middle
and as it sew down it pushes excess material in front of it and then as it
jumps down and
sews up it pushes excess material towards the middle where it meets the
existing stitches
and has no where to go leaving a gap that my guess would say maybe sticks up a
bit?
if you change the exit and entry points it will sew in a different order and
direction and maybe you can get around that
try starting and stopping at opposite sides of each other.
Hope it makes sense and helps a little.
Ron Vinyard
Body Cover / Magic Stitches
1-888-435-0176
541-471-1504 Fax 541-471-0427
420 SW H Street, Grants Pass, OR 97526-2532
info@xxxxxxxxxxxxxxxxxxx
www.bodycoverdesign.com
----- Original Message -----
From: "william schroeder" <sschroed2@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Thursday, November 09, 2006 7:32 PM
Subject: [amayausers] Re: Gaps in embroidery
> Good thought but can't do that, the area that it is happening in is a comples
> fill. There aren't any lines to drag.
>
> ----- Original Message ----
> From: "webmaster@xxxxxxxxxxxxxx" <webmaster@xxxxxxxxxxxxxx>
> To: amayausers@xxxxxxxxxxxxx
> Sent: Thursday, November 9, 2006 7:12:27 PM
> Subject: [amayausers] Re: Gaps in embroidery
>
>
> This message was posted by Judy on AmayaUsers.com. PLEASE DO NOT REPLY VIA
> EMAIL. Instead, respond to the thread on the WEBSITE by
> clicking here:
> http://www.amayausers.com/boards/ultimatebb.php?/topic/8/46.html#000001
>
> Hi Sue. Autodigitizing is a great start, and a little manual work always
> makes it better. Click on either the bottom piece and
> drag the top of it up and just a touch over the top one, or click on the top
> piece and drag the bottom of it down and just a touch
> over the bottom one. Best of luck!
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
>
>
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
