[amayausers.com] Re: Floor mats
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 12 May 2008 20:35:55 UT
This message was posted by Alicante on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/397/2.html#000015
Thanks for the comments. I have made some adjustments and now have a completed
test design that I am happy with.
Big improvement over first test sewout:
Only one thread break because of fraying.
Remaining issue: Constant stops for false bobbin thread breaks.
I checked the bobbin holder, cleaned it for possible thread or lint, made no
difference. I checked tension and bobbin side stitching.
Finally I decided to ignore it and restarted the machine after each false
bobbin thread break until it finished the design. The underside, that is the
bobbin thread side looks normal.
The test design, topside, looks good.
Here are the new settings I used:
Super Solvy topping, held lightly with pins on strands of 3/8in pile
Hooped two pieces of cutaway backing 2oz.
Carpet held in place on hoop with pins around hoop edge.
Density: 0.4
Primary underlay: Standard
Secondary: none
Fill: #4
Actifeed: 35 Manual
Speed:350
Now if I could just get rid of the false bobbin thread breaks, I'd be in
business. :p
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
