This message was posted by crookednail on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1286.html#000014 UPDATE...I'm doing the 20,000,000 presser foot stitch lubrication and wonder if the following is causing the clanking noise when sewing... I have the black cover off and it tells me to lift the presser foot and apply the EMB grease to the surface of the cam follower from what I can see in the picture it looks like there should be plenty of room to put the brush in and grease it. HOWEVER I can't push the foot up to expose the black "cam follower" because it hits what I'm going to call a "rod which is attached to a cam" that is behind it. SHOULD I be able to push the presser foot up freely with ample access as shown in the picture to grease the black part? Could this be one of my issues? Sue =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================