[amayausers.com] Re: Ethernet Link to machine not working
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 11 Nov 2008 22:27:42 UT
This message was posted by JTB Embroidery Services, Inc. on AmayaUsers.com.
PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/549/2.html#000015
Hi All,
All of the advise given on this subject is well and good. But if I had a
separate computer for every operation I run here in my home business, I would
have over 10 computers.
Currently for my Amaya Machines, I have one computer that runs Design Shop Pro
Plus and one computer for that runs the Amaya OS. That is not to say I don't
use those computers for other things, I do and without any problems. Both
computers have full access to the internet. The Amaya OS computer also runs a
24/7 radio email system for Winlink 2000 with a 75 watt vhf transmitter in the
same room. Never a problem. As to the cordless phones in the same proximity as
routers, there again, never a problem and I have one within 2 feet of my router
and Amayas. All of my computers are networked behind the router, (3 Windows
machines and 5 Macintosh Machines). They get along flawlessly. Just my 3 cents
worth.
Thanks
Doug
JTB Embroidery Services, Inc.
Denver, CO 80219-4319
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
