[amayausers.com] Re: Embroidering on a polo - HELP

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Sat, 16 May 2009 02:00:39 UT

This message was posted by Eye Kandy Designs on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/937.html#000005

Not yet...that was going to be my next attempt.  I bought a shirt and cut it up 
so I can just run a bunch of samples and see what works best...but thus far 
have not been having much luck with it looking real clean...and what I mean by 
that is the column outside edges lining up instead of going back and forth and 
some of the text is distorting up and down instead of being a straight 
horizontal line it looks like a wave in areas.

Have tried:
Density 4.0 with a pull comp of 120%, no underlay
and
Density 4.0 with a pull comp of 110%, center walk underlay and adjusted the 
fabric to medium knit.

again text is .70" high

any other suggestions besides the solvy?

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: