[amayausers.com] Re: Dog Collars
- From: Donna-Zbest472 <zbest472@xxxxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 10 Feb 2008 11:26:23 -0500
Thank you for the help
Do you know which font is best to use and if underlay is needed
Thanks,
Donna
Zbest472@xxxxxxxxxxxxx
Zbest Embroidery,Inc
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of
webmaster@xxxxxxxxxxxxxx
Sent: Saturday, February 09, 2008 7:12 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers.com] Re: Dog Collars
This message was posted by Digital Stitchz / LaserWorkz on AmayaUsers.com.
PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE
by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/427.html#000002
What type of thread are you using. If it is Rayon then use poly thread
because it is stronger As for needle, use 75/11. What is your setting for
speed and tension? You may need to slow down just a bit to 800-900 stitches
per minute. Try auto-tension and make sure the default lower setting is set
so it will not go below 2.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
