[amayausers] Re: Designshop pro won't convert!
- From: "Iris Embroidery" <irisembroidery@xxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Mon, 22 Aug 2005 09:38:56 -0700
Roland,
I tried converting it and was successful. I first converted it into
vector objects and then to embroidery.
Best Regards,
Veena.
IRIS EMBROIDERY
www.companycasuals.com/IrisEmbroidery
(510)-226-6171
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Roland R. Irish III
Sent: Monday, August 22, 2005 7:53 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Designshop pro won't convert!
Jeff, if I got the right image-it should be a 'barbecue chef' cartoon in
both .ai and .eps....I've used other artwork out of this collection with no
problem before, but this is the first art I've tried to convert since
upgrading the program.
We have aprons to do for a wedding in the next day or two so I need to get
it done! Other than totally 'hand drawing it' using the tools in designshop
I don't know what to do!
Thanks
Roland
> From: "Jeff Banks" <banksje@xxxxxxxxxxx>
> Reply-To: amayausers@xxxxxxxxxxxxx
> Date: Mon, 22 Aug 2005 08:12:16 -0600
> To: <amayausers@xxxxxxxxxxxxx>
> Subject: [amayausers] Re: Designshop pro won't convert!
>
> Roland,
>
> I would have to see the image and see what is happening. Not all images,
> even vector images, are suitable for conversion. Many times there are
colors
> or layers on layers, and depends on what detail is there to begin with.
> Depends on what type of object and other settings you are trying to
convert.
>
> Send me the file and let me look at it..
>
> Jeff Banks
> Melco Embroidery Systems
>
> ----- Original Message -----
> From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Monday, August 22, 2005 7:01 AM
> Subject: [amayausers] Re: Designshop pro won't convert!
>
>
>>
>> I had not attached the image, Steve (and others)...was wondering if I was
>> following the wrong steps. I have the graphic images on disk from Vector
>> Collection, one disk is dxf, other disk is ai (.art) and .eps. Dxf
doesn't
>> 'show' in designshop, and I tried the same image in ai and .eps. One of
>> the
>> versions came out as a horrible explosion like a plate of spaghetti...the
>> other one had the image perfect, but cannot convert it!
>> I do have Design Shop Pro....
>> so it should work!
>> I did not try to do the entire image-learned last year that just makes a
>> disaster. Tried ONE piece at a time and still crash the program.
>> Roland
>>> From: "Steve Cohen" <steve208321@xxxxxxxxxxx>
>>> Reply-To: amayausers@xxxxxxxxxxxxx
>>> Date: Fri, 19 Aug 2005 16:07:36 -0400
>>> To: amayausers@xxxxxxxxxxxxx
>>> Subject: [amayausers] Re: Designshop pro won't convert!
>>>
>>> Your gif didn't show up. Can you email it to me and I can play with it
>>> "Steve208321 at hotmail dot com"
>>>
>>>
>>> From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
>>> To: <amayausers@xxxxxxxxxxxxx>
>>> Date: Fri, 19 Aug 2005 15:38:47 -0400
>>> Am I doing something wrong? I have a graphic image (from Vector
>>> collection)
>>> in both ai (.art) and eps format. Opened up in Designshop pro, can see
>>> the
>>> image perfectly, and in project tree it is all 'vector fill'....and
>>> following the book, page 246, every time I try to convert it...the
>>> program
>>> crashes and shuts down. I don't even get the 'stitch vector object'
>>> button-it is now called something else-and crashes it.
>>> I need to get this done for a wedding next weekend....and havent' got
the
>>> time to sit and manually 'copy' it from scratch.
>>> Is this another bug/glitch in the upgraded Designshop I've found?
>>> anyone with any ideas let me know-I'll be pretty much gone from the
>>> office
>>> until monday morning so leave me a direct email!
>>> signman@xxxxxxxxxxxxxxxxxxx
>>>
>>>
>>>
>>>
>>
>>
>
>
>
Other related posts:
