[amayausers] Re: Designshop pro won't convert!
- From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Mon, 22 Aug 2005 09:01:41 -0400
I had not attached the image, Steve (and others)...was wondering if I was
following the wrong steps. I have the graphic images on disk from Vector
Collection, one disk is dxf, other disk is ai (.art) and .eps. Dxf doesn't
'show' in designshop, and I tried the same image in ai and .eps. One of the
versions came out as a horrible explosion like a plate of spaghetti...the
other one had the image perfect, but cannot convert it!
I do have Design Shop Pro....
so it should work!
I did not try to do the entire image-learned last year that just makes a
disaster. Tried ONE piece at a time and still crash the program.
Roland
> From: "Steve Cohen" <steve208321@xxxxxxxxxxx>
> Reply-To: amayausers@xxxxxxxxxxxxx
> Date: Fri, 19 Aug 2005 16:07:36 -0400
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: Designshop pro won't convert!
>
> Your gif didn't show up. Can you email it to me and I can play with it
> "Steve208321 at hotmail dot com"
>
>
> From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Date: Fri, 19 Aug 2005 15:38:47 -0400
> Am I doing something wrong? I have a graphic image (from Vector collection)
> in both ai (.art) and eps format. Opened up in Designshop pro, can see the
> image perfectly, and in project tree it is all 'vector fill'....and
> following the book, page 246, every time I try to convert it...the program
> crashes and shuts down. I don't even get the 'stitch vector object'
> button-it is now called something else-and crashes it.
> I need to get this done for a wedding next weekend....and havent' got the
> time to sit and manually 'copy' it from scratch.
> Is this another bug/glitch in the upgraded Designshop I've found?
> anyone with any ideas let me know-I'll be pretty much gone from the office
> until monday morning so leave me a direct email!
> signman@xxxxxxxxxxxxxxxxxxx
>
>
>
>
Other related posts:
